Ability of destruction in weight: 60 Kg/h.
It should be able to work less 10 hours/day
This incinerator must have the ability to destruct all combustible wastes produced by hospitals, private practices, labs, institutes, etc…
Design Specification: Types A, B, C, D, and E of medical waste
“PYROLYTIC” combustion, by simply controlling the gasification of waste.
The incinerator must prevent the discharge of smoke and dust that is fine, (Smokeless) during the loadings.
It should have the ability to reduce the quantity of wastes from 98%.
It should be able to hold emission in the next burn with gas residence of less than two seconds.
The incineration should be completely free of visible smoke as well as offensive odours.
The lower volt electricity (L.C.P) of the waste will be 3,500 kcal/kg
The Temperatures of combustionMinimum will be 850oC and maximum 1400oC
Post combustion: 1100oC.
The Inner diameter of the Chimney: Ø 400 and its elevation: 8 m
The Volume of the combustion chamber: 1.200 L
The Dimension of this doorway for loading cm: 70×70.
Burner operation should be Automatic On/Off
The provider must supply necessary information for the top of this installment
This incinerator with”PYROLYTIC” combustion must have:
A combustion chamber of waste:
* Totally tight doorway for the manual loading of waste. The loading should be Manual, Batch Load
* A burner of lighting that the use is restricted to the ignition of waste.
* Frontage of loading with door seals ended up on hinges, wheel of screw plug, elastic joint, and stuffing insulating from refractory.
* The insulation of the combustion chamber should be made up of refractory bricks, so using a high content of aluminium and insulates bricks in order to guarantee a minimum temperature on the exterior sheet metal.
* Composition of this refractory;
. Nature: 42 percent of Al203
Insulate in fibrous panels:
. Thickness: ≥75 mm
Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting directing stirring flame, lighting and safety of digital ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.